Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows.
Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows.
Service access to the roller shutter box is provided by the inspection flap (the place through which we can intervene inside the box). In roller shutters, the damper is always located inside the room.
The inner part of the roller shutter box is visible from the inside and is insulated with a thermal insert over the entire width of the blind. The thickness of the insert depends on the type of the box, which is discussed in more detail in the models of blinds.
All varieties of tpo mounted shutters have a PVC assembly profile thanks to which the blinds and joinery are easily and effectively connected (regardless of which the joinery is made).
For blinds with a width greater than 2000 mm, it is recommended to use a box reinforcement.
The blind profile is always visible from the outside and is a convex part with characteristic grooves extending over the entire width. Depending on the width and height of the blind, we offer both PVC profile and aluminum profile.
Manual operation is available using a tape, crank of Kardan or motor with switch or remote controle.
This model of roller blind is designed for passive construction. The box is very well insulated.
There is a roller blind with an inspection flap on the inside and outside.
This model of the roller blind is dedicated to solutions where an overhead blind made of plastic is provided. If the standard form of roller blind installation is maintained, we obtain much better thermal parameters. Roller blind treatment is possible from the internal and external side. Visible inspection flap on the flat side.
The roller blind with external inspection is dedicated to customers who expect the best thermal parameters. It is possible to completely install the box. Access to the roller blind through an external revision from the bottom of the box guarantees quiet operation, high comfort of use and high aesthetic values.
Very well insulated boxes in one height of 309 mm and various depths: 300 and 365 mm
Available with a mosquito net regardless of the location of the inspection flap
A system of roller shutters dedicated for renovation and monoblock windows.
 roller shutter PVC guide RK- 18 |  roller shutter PVC guide, single, RK-16 | |
 roller shutter PVC guide for profile 52, RK-18 M |
 roller shutter PVC guide NPR-020 |  roller shutter aluminium guide NPR-040 | |
 roller shutter PVC guide, with mosquito net NPR-010 |  roller shutter aluminium guide, with mosquito net NPR-050 | |
 roller shutter PVC guide PVC for mosquito net NPR- 040 |
 roller shutter PVC guide, NRR-010 |
| |
 roller shutter PVC guide, NRR-020 |
| |
roller shutter PVC guide, single, RK-16 |
|
For all models of top mounted shutters:
are available distance (for shutter guides)
The aluminium profiles are made of rolled sheet, powder-coated, filled with Freon-free polyurethane foam. It ensures perfect acoustic and thermal insulation.
 PA 39 profile without perforation  PA 39 profile with perforation |  | Profile height: 39 mm Maximum width of the shutter: 2500 mm Maximum area of the shutter: 6,5 m2 Weight 1 m2: 2,8 kg |
 PA 45 profile without perforation  PA 45 profile with perforation |
| Profile height: 45 mm Maximum width of the shutter: 3000 mm Maximum area of the shutter: 6,5 m2 Weight 1 m2: 2,9 kg |
 PA 52 profile without perforation  PA 52 profile with perforation |
| Profile height: 52 mm Maximum width of the shutter: 3700 mm Maximum area of the shutter: 8,0 m2 Weight 1 m2: 3,0 kg |
PVC profiles are made of high-quality material (polyvinyl chloride) resistant to UV radiation.
 PVC 37 profile with perforation |  | Profile height: 37 mm Maximum width of the shutter: 1600 mm Maximum area of the shutter: 3,0 m2 Weight 1 m2: 3,5 kg |
 PVC 52 profile with perforation |  | Profile height: 52 mm Maximum width of the shutter: 3000 mm Maximum area of the shutter: 4,5 m2 Weight 1 m2: 4,0 kg
|
Colours of veneer for boxes, guides and ending slats
Following elements of top mounted shutters can be covered with veneer: boxes, guides and ending slats. Profile has own coulour, very, very similar to colour of veneer but not identical.
aluminium profiles are painted and PVC profiles colored in mass.
Below we present ways of operating the rolling shutter the most often chosen: belt, crank Mignon, crank Kardan.
 belt |  belt and crank Mignon |  crank Kardan |
The most comfortable and increasingly popular way of operating blinds in motion is the electric drive.
Electric using – motor + switch or remote control
 Inis Uno |  Inis Duo |  Tellis |  Smoove Origin RTS |
 switch |  remote control |
Designed for roller shutters equipped with motors with obstacle detection. It is a guarantee of proper operation of the blind and additionally blocks the armor before lifting it from the outside.
 |  |
The most common security feature is a lock located in the bottom strip
 |  |
Before lifting the armor from the outside, they securely secure the automatic bolts.
 |  |
In top mounted rolling shutters width over 2000 mm long, it is recommended to use steel reinforcement or static consoles.
 |
Go to the gallery 
